Job One is making your specialty parts to your specifications
SyncFab is ITAR-registered. The seamless integration of our Manufacturing Partner Network with our in-house applications engineering team and Quality Assurance technology process enables us to ensure the quality of every part shipped. Our professionally-trained quality team continuously improves the part certification documentation process and our virtual inspection process to bring you part quality peace of mind for each and every single order.
ITAR, AS9100, ISO 9001, ISO 13485, UL, ISO 7 & 8 Medical Clean Room, NADCAP and More…
SyncFab inspects your parts to the degree that your programs require.
Machine Learning Technology
Putting Big Data to work to save you time and money in custom manufacturing.
More certifications, not listed below, can be requested during our order process.
ISO 9001 is the title of an ISO standard (who is ISO?) that outlines the requirements an organization must maintain in its quality system for certification to ISO 9001. There are several different documents in the ISO 9000 family of standards, but ISO 9001 is the only standard in the 9000 series that requires certification.
ITAR (International Traffic in Arms Regulations) and the EAR (Export Administration Regulations) are export control regulations run by different departments of the US Government. Both of them are designed to help ensure that defense related technology does
not get into the wrong hands.
MIL-PRF-31032 is a certification based on a military performance specification titled “Printed Circuit Board/Printed Wiring Board, General Specification For” whose scope specifies the performance requirements for printed circuit boards or printed wiring boards and the confirmation requirements for insuring that these items meet the relevant performance requirements. This specification intends to allow the device manufacturer the freedom to enact best commercial practices while still delivering products that meet military performance needs.
RoHS stands for Restriction of Hazardous Substances. RoHS, also known as Directive 2002/95/EC, originated in the European Union and restricts the use of specific hazardous materials found in electrical and electronic products. The substances banned under RoHS are lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (CrVI), polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), and four different phthalates (DEHP, BBP, BBP, DIBP).
The JCP established in 1985 to allow United States (U.S.)/Canadian contractors to apply for access to Department of Defense/Department of National Defence (DOD/DND) unclassified export controlled technical data/critical technology on an equally favorable basis in accordance with DODI 5320.25 “Withholding of Unclassified Technical Data and Technology from Public Disclosure”, and Canadian Technical Data Control Regulations.
1AS9100 is an aerospace standard based on the ISO 9001 quality system requirements. AS9100 takes the ISO 9001 requirements and supplements them with additional quality system requirements, which are established by the aerospace industry in order to satisfy DOD, NASA and FAA quality requirements.
AS9100A is a company level certification based on a standard published by the Society of Automotive Engineers (SAE) titled “Quality Systems-Aerospace-Model for Quality Assurance in Design, Development, Production, Installation and Servicing”. AS9100A replaced AS9100; the current version of this standard
AS9100B is a company level certification based on a standard published by the Society of Automotive Engineers (SAE) titled “Quality Systems-Aerospace-Requirements”. AS9100B has now been replaced by AS9100C. The AS9100B standard includes the ISO 9001:2000 requirements and additional requirements specific to the aerospace industry. Companies wishing to be become certified will be evaluated against this standard.
AS9100C is a company level certification based on a standard published by the Society of Automotive Engineers (SAE) titled “Quality Management Systems-Requirements for Aviation, Space and Defense Organizations”. This standard revises the previous issue, AS9100B.
AS9100D is a company level certification based on a standard published by the Society of Automotive Engineers (SAE) titled “Quality Management Systems – Requirements for Aviation, Space and Defense Organizations”. This standard revises the previous issue, AS9100C.
AS9101, Quality Management Systems – Audit Requirements for Aviation, Space, and Defense Organizations, is a procedure used by the certification body to define the assessment report that is to be presented once any certification, surveillance or re-certification audit is completed. This procedure includes a checklist of all the AS9100 clauses that are assessed as part of the audit, and a scoring mechanism to help determine the effectiveness of the QMS systems and processes during the audit. The current
revision is AS9101 Rev F (against AS9100 Rev D), however, AS9101 Rev E is still in use for audits of QMS systems that
have not yet transitioned
AS9102, Aerospace First Article Inspection Requirement, is a standard that outlines a best practice process for performing this first article inspection, including necessary checklists and forms. The intent of this standard is to act as a standardized process for companies who need to perform FAI on their products or assemblies, providing all of the records needed when the forms are completed. The latest revision is Rev B.
Like AS9102 the use of this standard is not required in your QMS, unless mandated by a contract. It does, however provide a best practice process for implementing variation management. Throughout your processes that influence the variation of key characteristics of parts or services, AS9103 is designed to improve the manufacturing processes. If you need to improve the confidence in these part features, then turning to AS9103 for guidance is beneficial. The latest revision is Rev A.
ISO/TS 16949 is an ISO technical specification aimed at the development of a quality management system that provides for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the automotive industry
IATF 16949 is a global Quality Management System Standard for the Automotive industry. IATF 16949:2016 incorporates the structure and requirements of the ISO 9001:2015 quality management system standard with additional automotive customer-specific requirements. It was developed by the International Automotive Task Force (IATF), with support from AIAG. This standard requires certification by a 3rd party auditor (Registrar/CB/Certification Body).
SyncFab inspects your parts to the degree that your programs require
Standard Inspection With Dimensional Report
CMM Inspection With Dimensional Report
First Article Inspection Report (per AS9102)
Custom: Choose this option if your part requires custom inspection requirements such as, but not limited to, the following: Non-Destructive Testing, Serialization, Custom Sampling Plan, or if you would like to provide your own inspection datasheet.
Manufacturing Partner Network facilities have the latest equipment to perform requisite inspections.
In-line CAD stations for technicians
Part drawing creation to your datum schemes
Measuring Equipment Certification programs
Coordinate measurement machine (CMM) from Hexagon Metrology
Mass Spectrometer (XRF) to validate material compositions
Ring and thread gauges
Gage blocks and gage pins
Assortment of micrometers and calipers
SyncFab Quality Assurance
You will receive timely and thorough communication from our Quality Assurance professionals. Examples include design feature confirmation, tolerance, and datum scheme confirmation, design value optimization (VA/VE), sharing of key quality documents and more. With high-precision industrial manufacturing, a variety of available finishes on solid metal or plastic parts, and our Quality Assurance capabilities, SyncFab guarantees your custom parts will be built to your specifications.
Get precision manufactured parts,
faster and cheaper.
OEMs can slash procurement time and costs for precision parts with a supplier network secured by blockchain for anti-counterfeit, recalls and more.
Faster Cost-Effective Parts. Free quotes show you how. Program Managers and NPI Engineers cut your procurement time and cost for custom precision parts secured by blockchain for compliance, risk management, anti-counterfeit and more.